Glass replacement and glazing services in London for homes, shops and offices.

Glazing London supplies and fits replacement glass across Central & North London: glass replacement and cutting to size, double glazing repairs, misted unit replacement, and specialist toughened, laminated, acoustic and fire-rated glass. Open 24/7, with free fixed quotes by phone or WhatsApp photo before any work starts.
Glass replacement
Frames kept · glass renewed
In nine cases out of ten a broken, misted or draughty window needs new glass, not a new window. We reglaze uPVC, aluminium and timber frames at a fraction of the cost of replacement, with no mess and no redecorating.
Glass replacement & cut to size
Broken panes measured, cut and refitted, with glass cut to size from our Wood Green workshop.
Typical spec4mm & 6mm float · same-day on stock sizes · putty or beaded frames
Misted & failed double glazed units
Condensation between panes means the sealed unit has failed. We replace the unit only. The frame stays.
Typical specUnits made to measure · 7-10 days · fitted in under an hour each
Double glazing repairs
Failed seals, cracked panes, packers and re-toe-and-heeling of dropped sashes, all part of our wider window & door repair service.
Typical spec28mm units common (4-20-4) · warm-edge spacers · argon fill available
Triple glazing
Three panes and two cavities for the coldest or noisiest elevations. Most worthwhile on new frames or deep rebates.
Typical spec36-44mm units · U-values to 0.8 W/m²K · check rebate depth first
Single glazing
Traditional single panes for period sashes, internal doors and outbuildings, puttied or beaded to match the original.
Typical spec3-6mm float · 6.4mm laminated where safety glazing applies
Secondary glazing
A discreet second window inside the original: the noise and heat fix for period and listed buildings.
Typical specSliders, lift-outs & fixed panels · up to 80% noise reduction
Cat flap fitting in glass
Toughened glass cannot be cut, so we make a new sealed unit with the aperture already in it. See cat flap fitting.
Typical specaperture cut pre-toughening · glass, uPVC & patio doors · microchip flaps
Specialist glass
Specified to the job, not the shelf
The right glass depends on what the pane has to do: resist impact, hold together when broken, block noise, hold back fire or keep heat in. Every specialist type below can be supplied as single panes or built into sealed double glazed units.
Toughened safety glass B1
Heat-treated to roughly five times the strength of float; shatters into blunt granules. The default for doors, low-level glazing and table tops.
Laminated security glass B2
Two panes bonded over a PVB interlayer. It cracks but stays in the frame, so it resists burglars and protects shopfronts and rooflights.
Acoustic / soundproof glass B3
Asymmetric panes with an acoustic interlayer cut traffic and flight-path noise. Pairs well with secondary glazing on the worst roads.
6.4mm · 6.8mm · 10.8mm
Fire-rated glass B4
Holds integrity for 30 or 60 minutes in doors, screens and vision panels. See our fire door service for certified installation.
7mm E30 · 11mm E60 · 15mm EI30
Low-E energy efficient glass B5
An invisible metallic coating reflects room heat back inside. Standard in every sealed unit we make, and it cuts heat loss through the glass by more than half.
4mm · 6mm · in 28mm units
Solar control glass B6
Tinted or coated to reject summer solar gain: the fix for overheating south-facing rooms, rooflights and glazed extensions.
6mm · 10mm · units to order
Switchable smart glass B7
Turns from clear to opaque at the flick of a switch: privacy for meeting rooms, bathrooms and street-facing glazing without blinds.
laminated panels · made to order
Obscure & patterned glass B8
Satin, stippolyte, reeded and traditional patterns in five privacy levels, matched to existing panes wherever possible.
4mm · 6mm · toughened option
Curved & bent glass B9
Slumped to a template for bow windows, curved shopfronts and period doors. We are one of the few London glaziers who will still quote for it.
4-10mm · templated
Glass features
Made, templated & installed
Mirrors & mirror walls
Bespoke mirrors cut to size, polished and drilled, from bathroom mirrors to full gym and studio mirror walls, bonded or screw-fixed with safety backing.
Glass splashbacks
Toughened 6mm splashbacks painted in any RAL colour, templated around sockets and hobs, for a seamless, grout-free alternative to tiles.
Shower screens & bathroom glazing
Frameless and semi-frameless screens in 8-10mm toughened glass, hinged or fixed, with easy-clean coating, made to your exact opening.
Glass shelving
Toughened 6-10mm shelves with polished edges, cut to size for alcoves, bathrooms and retail displays, with brackets supplied and fitted.
Cat flap installation in glass
A round aperture cut into a new toughened pane or sealed unit, made to your flap model. A clean job that keeps the unit's seal intact.
Questions
Planning ahead? Book a free survey and fixed quote, or go straight to misted double glazing repair, secondary glazing or glass cut to size.
Related services
Glass replacement, answered
How quickly can you replace broken glass in London?
Stock float, toughened and laminated glass can usually be cut and fitted the same day. Made-to-order sealed double glazed units typically take 7-10 working days; we can board up or fit temporary glazing in the meantime, 24/7. See emergency glazing.
Can you replace just the glass and keep my existing frames?
Yes. In most cases we replace only the glass or the sealed unit, whether the frame is uPVC, aluminium or timber. It is significantly cheaper than replacing the whole window and there is no redecorating afterwards. If the frame itself is failing, our window & door repair team will tell you straight.
What thickness of glass do I need?
It depends on the pane size and use: 4mm float suits small windows, 6mm for larger panes and shelving, 6.4mm laminated for safety-critical areas, and 10-12mm toughened for frameless showers, balustrades and heavy-use doors. We confirm the correct specification when we measure.
Is toughened or laminated glass required by law?
Building Regulations (Approved Document K) require safety glass in critical locations: glazed doors, side panels within 300mm of a door, and glazing below 800mm from floor level. We fit toughened or laminated glass marked to BS EN 12150 / BS EN 14449 in these zones as standard.
Do you charge for quotes on glass replacement?
No. Send a photo and rough sizes on WhatsApp to 07915 903485 for an instant estimate, or book a free measured survey. The fixed price we agree before work starts is the price you pay.
Do you supply and fit mirrors and splashbacks?
Yes: mirrors and mirror walls, coloured glass splashbacks, shower screens, glass shelving and even cat flaps cut into glass. Everything is templated, cut to size and installed by our own glaziers.
Where does the law say I need safety glass?
In doors and side panels within 300mm of a door, from the floor up to 1500mm, and in any other glazing below 800mm from the floor. Our room-by-room checklist shows which panes in your home count: where is safety glass required.